Eliminate is a superb product designed especially for the fast and effective removal of the heaviest build-up of floor finish.

It has excellent penetrating power and is low foaming making its action unparalleled.

This unique blend of chemical agents barrage and eat /corrode through old floor finishes with minimal agitation required. Other stripping products simply don't compare!

Directions

LIGHT DUTY STRIPPER & CUT BACK MIX

1 part Eliminate to 8 parts cold or warm water. For low levels of sealer or polish build-up, or when cutting back an old and dirty floor prior to recoating, just mop on and lightly scrub with blue or green pad. Damp mop up white polish residue before it dries.

HEAVY DUTY STRIPPER MIX - 

1 part Eliminate to 4 parts cold or luke warm water. Allow to activate for 5 to 15 minutes and mop or machine scrub. This is for heavy build-up on porous Terrazzo, concrete or heavily built-up edges in supermarkets or shopping centres. It's the solution you try when all other products have failed to do the job.

DRY STRIPPING / SPRAYBUFF METHOD

1 part Eliminate to 6 parts water.

Apply by lightly misting over area so that the floor is just wetted without puddles. Allow to activate for 30 seconds to 1 minute. Fit "high performance" black pad or regular black pad to machine and "work" up and down the edges then across the aisle to even up the appearance. Spray the next section prior to finishing the first so Eliminate has a few minutes to soften the finishing prior to padding back.

SAFETY DIRECTION:

Avoid contact with eyes and skin and avoid breathing vapour. When handling continuously, use impervious gloves and anti splash goggles. If inhalation risk exists wear organic vapour respirator. Always wash hands before smoking, eating, drinking or using the toilet.