Product Description & Directions for Use:
A high solids metallised 'dry-bright' floor finish formulated to give a long lasting deep gloss shine on vinyl, linoleum, thermo-plastic, rubber, sealed wood, cork, concrete, asphalt, terrazzo and other non-porous smooth floors coverings.
For professional and industrial use only.
Proshine is ready-to-use. Do not dilute with water.
Do not shake container.
Ensure floor is clean, dry and free from all residues. Semi-porous, concrete and impoverished floors should be sealed with a base coat of Proseal. Spread Proshine evenly using a slightly damp mop or polish applicator. Apply 2 or 3 very thin coats, allowing 30 to 60 minutes between coats. Do not over apply. Coverage is approximately 250 m² per 5L per coat. Allow final coat to dry completely before re-use. Do not buff floor at this stage. Periodically the floor gloss can be maintained by spray buffing with Protreat.
Keep from freezing.
PROSHINE is a high gloss, metallised emulsion, self-shining polish for vinyl, thermoplastic and sealed floors.
• Contains 25% polymer for a long lasting deep slip resistant shine.
• Two or three thin coats are recommended for best results.
• White emulsion with acrylic odour.
• Coverage approx. 250m2 per 5 litres per coat.
pH Concentrate: 9.0
pH Diluted: Not applicableHigh gloss metallised emulsion self-shining polish for vinyl thermoplastic and sealed floors. Contains 25% polymer for a long lasting deep non-slip shine.
Two or three thin coats are recommended for best results. White emulsion with acrylic odour.
Coverage approx. 250m2 per 5 litres per coat. Ready-to-use pH 8.2
|pH||Ready-to-use pH 8.2|
Prochem Proshine 5 Litres C503-05
- Brand: Prochem
- Product Code: PROC/C503-05
- Availability: 1
Tags: High, gloss, metallised, emulsion, self-shining, polish, vinyl, thermoplastic, sealed, floors, Contains, 25%, polymer, long, lasting, deep, non-slip, shine, Two, three, thin, coats, recommended, best, results, White, emulsion, acrylic, odour